SOMNI  STRAIN SENSORS ARE IN TURKEY

STRAIN SENSORS ARE

   Strain sensors are designed for application areas in which there is a need to measure the deformation due to external forces acting on an object of interest.

   Different strain sensor types are available, each designed to fulfill a specific need and application area.

Strain sensors can be either spot welded, screwed or glued to the object. Each strain is dual ended such that a large number of strain sensors can be easily wired into a single array.

   For extra accuracy an intrinsic temperature sensor is added to the strain sensor.

PRODUCTS

SC 1000 T

   Fiber Bragg Grating based long gauge strain sensor with 1m measuring base (gauge length). Developed specifically for measurements of large structures.

​
   Measures strain between its anchoring brackets and is therefore immune to local defects in the substrate.

  • sensitivity 1.4 pm/microstrain
  • range -5000 to + 5000 microstrain
  • accuracy <0.35% full scale
  • integrated temperature compensation
  • rugged, stainless steel (316L)
  • IP 67 protection

SP 39 T

   Fiber Bragg Grating based short gauge spot-weldable strain sensor

   A very robust sensor, which can measure very small strains and displacements with high accuracy.

   Integrated temperature compensation, and can be connected in series with more strain sensors or other sensors.

  • sensitivity 1.2 pm/microstrain
  • range -2000 to + 2000 microstrain
  • accuracy <0.5% full scale
  • integrated temperature compensation
  • integrated temperature compensation
  • IP 67 protection

SW 40 NT

  Small sized fiber Bragg Grating based strain sensor. Sensor can be glued or spot welded to a surface.

   This sensor can be configured with a single strain sensor or, per request, this sensor can be configured with an array of strain sensors to measure the strain at multiple points.

​

  • sensitivity 1.2 pm/microstrain
  • range -1500 to + 1500 microstrain
  • accuracy <0.5% full scale
  • integrated temperature compensation
  • stainless steel (304) 0.2 mm thick
  • optional: integrated temperature compensation

DOCUMENTS